(z.B. Testsender) kann jedoch gewissen Beschränkungen unterliegen. Lesen Sie dazu bitte die Anmerkungen in der
Betriebsanleitung.
Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt
gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu überprüfen.
Certificate of the Manufacturer/Importer
It is hereby certified that the XET1001 85 Mbps Wall-Plugged Ethernet Adapter has been suppressed in accordance with
the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for
example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please
refer to the notes in the operating instructions.
Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market
and has been granted the right to test the series for compliance with the regulations.
Product and Publication Details
Model Number:
XET1001
Publication Date:
Product Family:
January 2008
PowerLine Adapter
Product Name:
XET1001 85 Mbps Wall-Plugged Ethernet Adapter
Home or Business Product:
Language:
Home
English
Publication Part Number:
202-10376-01
Publication Version Number: 1.0
iii
v1.0, January 2008
iv
v1.0, January 2008
Contents
XET1001 Wall-Plugged Ethernet Adapter User Guide
About This Manual .............................................................................................................1
Conventions, Formats, and Scope ..............................................................................1
How to Print This Manual ............................................................................................2
Package Contents .............................................................................................................3
Label Information and Status Lights ..................................................................................3
The Label on the Rear Panel ......................................................................................3
Front Panel Status Lights ............................................................................................4
How the PowerLine Adapter Fits in Your Network .............................................................5
Prepare to Install Your PowerLine Adapter ........................................................................5
Connect an XET1001 to the Router ..................................................................................6
Connect other Ethernet PowerLine Adapters ....................................................................8
(Highly Recommended) .....................................................................................................8
Set Your Network Password ............................................................................................12
Add a Device to an Existing PowerLine Network ............................................................14
Troubleshooting ...............................................................................................................15
NETGEAR Product Registration, Support, and Documentation ...............................15
Basic Functioning ......................................................................................................15
Technical Specifications ...................................................................................................17
Default Configuration Settings ..................................................................................17
Technical Specifications ............................................................................................17
v
v1.0, January 2008
vi
v1.0, January 2008
About This Manual
The XET1001 Wall-Plugged Ethernet Adapter User Guide describes how to install, configure, and
troubleshoot the NETGEAR® XET1001 Wall-Plugged Ethernet Adapter. The information in this
manual is intended for readers with intermediate computer and Internet skills. For information
Conventions, Formats, and Scope
The conventions, formats, and scope of this manual are described in the following sections.
•
Typographical conventions. This manual uses the following typographical conventions.
Italic
Emphasis, books, CDs, file and server names, extensions
User input, IP addresses, GUI screen text
Command prompt, CLI text, code
URL links
Bold
Fixed
italic
•
Formats. This manual uses the following formats to highlight special messages.
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note may result in a malfunction or damage to the
equipment.
Danger: This is a safety warning. Failure to take heed of this notice may result in
personal injury or death.
1
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
•
Scope. This manual is written for the XET1001 Wall-Plugged Ethernet Adapter according to
these specifications.
Product version
XET1001 85 Mbps Wall-Plugged Ethernet Adapter
January 2008
Manual publication date
How to Print This Manual
To print this manual, you can choose one of the following options, according to your needs. Your
computer must have the free Adobe Acrobat Reader installed in order to view and print PDF files.
•
Printing a chapter. Use the PDF of This Chapter link at the top left of any page.
–
Click the PDF of This Chapter link at the top right of any page in the chapter you want to
print. The PDF version of the chapter you were viewing opens in a browser window.
–
Click the print icon in the upper left of the window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer toner by selecting this feature.
•
Printing the full manual. Use the Complete PDF Manual link at the top left of any page.
–
Click the Complete PDF Manual link at the top left of any page in the manual. The PDF
version of the complete manual opens in a browser window.
–
Click the print icon in the upper left of the window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer toner by selecting this feature.
2
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
Package Contents
The product package should contain the following items:
•
One or two XET1001 85 Mbps Wall-Plugged Ethernet Adapters, depending on whether you
purchased a single unit or a bundle.
•
A Resource CD, which includes:
–
–
–
A PDF version of this manual
A PDF version of the XET1001 Installation Guide
The XET1001 PowerLine Encryption Utility
•
XET1001 Installation Guide, Registration, Warranty Card, and Support Information Card.
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the PowerLine adapter
for repair.
Label Information and Status Lights
The PowerLine adapter has a label with important information and status light indicators.
Familiarize yourself with these features of your product.
The Label on the Rear Panel
The label on the rear panel of the PowerLine adapter contains the items listed below.
•
•
•
•
MAC address
Model number
Serial number
Unique device Passcode (PWD)
3
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
Front Panel Status Lights
The front panel of the XET1001 contains status lights. You can use them to verify connections.
The table below describes the lights on the front panel.
Table 2-1. Front Panel Status Light Descriptions
Status
Front Panel
Description
Light
Power
• On green solid. Power is supplied to the PowerLine adapter.
• Blink. Power-on self-test.
• Off. Power is not supplied to the PowerLine adapter.
HomePlug • On. The HomePlug port has detected another PowerLine device on
the PowerLine network.
• Blink. Data is being transmitted or received on the PowerLine
network.
• Off. No other PowerLine devices detected on the PowerLine network.
Ethernet • On green solid. The Ethernet port is linked but there is no
activity.
• Blink. Data is being transmitted or received between the Ethernet
port and the PowerLine.
Figure 3
• Off. No link is detected.
4
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
How the PowerLine Adapter Fits in Your Network
You can use the XET1001 Wall-Plugged Ethernet Adapter to implement or extend an Ethernet
local area network (LAN) anywhere in your house using your existing electrical power line in
place of a dedicated LAN wiring infrastructure. An example is illustrated in the following diagram
for a minimal network consisting of two PowerLine devices:
Internet
Access
Router
Computer
XET1001
Ethernet Network
PowerLine Network
(always encrypted)
Computer
XET1001
Ethernet Network
Figure 4
Follow the instructions below to set up your PowerLine adapter.
Prepare to Install Your PowerLine Adapter
Check that these minimum requirements are met.
•
•
•
Your Ethernet network is set up and an Ethernet port is available on your router.
Your Internet connection is working.
Each computer or device to be used on your network has an Ethernet port.
5
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
Connect an XET1001 to the Router
Internet
Access
Wireless
Router
XET1001
Ethernet Network
Figure 5
1. First, connect an XET1001 Wall-Plugged Ethernet Adapter to a LAN port on the router so that
the PowerLine network can access the Internet.
WARNING!
Figure 6
Do not connect the PowerLine adapter to a power strip, extension cord, or surge protector as
this may prevent it from working properly or degrade the network performance.
6
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
a. Plug the blue Ethernet cable that came in the box into a LAN port on your router or switch
in your network.
Wall-Plugged Ethernet Adapter XET1001
router
power
LAN
ports
Internet
Figure 7
c. Plug the other end of blue Ethernet cable that came in the box into the PowerLine adapter.
Check the status lights:
•
•
•
Power: The power LED turns solid green. If it does not, see “Troubleshooting” on
page 15.
HomePlug: The HomePlug LED blinks to indicate that the device is connected to the
power line, and that no other PowerLine devices have been detected at this stage.
Ethernet: The Ethernet LED blinks to indicate activity. If not, make sure that the
Ethernet cable on the PowerLine adapter that you connected in the previous step is
securely attached to the PowerLine adapter and the router, that the router is connected
to the modem, and the router and modem are powered on.
d. Make sure that the Internet port of your router is connected to your modem, and that your
computer is either connected to a LAN port on the router or to a port on the PowerLine
adapter.
7
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
Connect other Ethernet PowerLine Adapters
1. Before plugging in your other PowerLine devices, take a note of the device password printed
on the label on the back of each device. You will need this password later if you want to
change the PowerLine network password. If you are adding more than one other PowerLine
adapter, also note the MAC address given on the label, so that you will know which device the
password is for.
2. Plug your other PowerLine devices into power outlets in your home near to the other
computers and peripherals to be included in your PowerLine local area network.
3. Use an Ethernet cable to connect an Ethernet port on each of the computers and peripherals to
the nearest PowerLine device.
4. When you plug in a second PowerLine adapter into a power outlet, check the blue HomePlug
LEDs. They should turn on and then briefly blink at the same time as the Ethernet activity
LED.
This completes the PowerLine installation.
Install the XET1001 PowerLine Encryption Utility
(Highly Recommended)
The utility gives you the option of setting a unique encryption PowerLine network password.
Important features:
•
•
The encryption password is case-sensitive.
Each device must be set to exactly the same encryption password—if they are to communicate
on the same network. PowerLine devices on different networks will not be able to
communicate.
•
•
A default button resets the encryption password to the default password (HomePlug).
The encryption password can protect your network from unauthorized access through the
PowerLine network.
•
A device password is printed on each NETGEAR PowerLine product. This is not the network
password, but you are required to enter it if you are setting the network password with another
PowerLine adapter device.
8
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
To install the PowerLine Encryption Utility, follow these steps:
1. Insert the Resource CD into a CD drive on the computer that is connected to your router1. The
CD starts automatically. The following screen is displayed:
Figure 8
If the CD does not start automatically:
•
Go to My Computer on the Windows Start menu, and double-click the drive that contains
the Resource CD or
•
Select the CD drive and click on the Autorun.exe executable file.
1. All devices on a PowerLine network can be managed from one computer. If you add another XET1001
device to an existing PowerLine network, you can install the PowerLine encryption utility on the computer
connected locally to the new XET1001 device or on the computer originally used to set up the PowerLine
network password. You can use any computer to manage the network, but this procedure assumes that you are
working from the computer that is connected to your router.
9
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
2. Click Install Software, and the Welcome screen appears.
Figure 9
3. Click Next and follow the instructions on the screen.
Figure 10
4. Enter your user name and organization and then click Next.
10
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
5. Specify where the files will be saved on your computer:
Figure 11
•
Change. Choose the location. Type a new folder name or select another location using the
folder options and then click OK.
•
Next. Accept the default location.
6. The InstallShield Wizard indicates that the program is ready to install.
Figure 12
7. Click Install.
8. When the installation is complete, click Finish.
11
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
Set Your Network Password
The fastest and most reliable way to set the network password is to set the password for all devices
at once. To do this, you need the device password on the back label of each PowerLine device.
There are two steps to setting the password: first enter the device password for each remote
PowerLine device, and then set the network password.
1. Enter the device password for each remote PowerLine device:
a. Make sure that all PowerLine devices are plugged into 100~240V AC wall sockets.
b. Start the PowerLine encryption utility and click the Main tab.
Figure 13
c. Check that the utility lists all the remote PowerLine devices
d. Select a PowerLine device and, if more than one remote device is listed, identify it from
the MAC address.
12
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
e. Click Enter Password.
Figure 14
f. Enter the password recorded from the label on the back of the selected PowerLine device.
g. Click OK.
h. Repeat this step for all devices that you want attached to your network.
2. Set the network password.
a. Select the Security tab.
Figure 15
b. Type a password in the Private Network Password text box.
c. Click Set All Devices. A pop-up window indicates that the operation was successful.
13
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
Add a Device to an Existing PowerLine Network
To add a device to a PowerLine network with the default network password, all you need to do is
plug the new device into a power outlet.
If the network password has been set, then you will need to run the PowerLine encryption utility to
set the new device to the network password. How you do this depends on whether the computer
running the PowerLine encryption utility is connnected directly to the new PowerLine device
(local) or is connected to a different device in the PowerLine network (remote).
Adding a New Device from a Locally Connected Computer
1. Plug the new PowerLine device into an available AC power outlet and connect it to an
Ethernet port on the computer.
2. Start the PowerLine encryption utility and select the Security tab.
3. Type the network password in the Private Network Password text box and click Set Local
Device Only.
4. Select the Main tab and check that the other devices in the PowerLine network appear in the
device list. It may take a minute or two for all devices in the network to be detected.
Adding a New Device from a Remotely Connected Computer
1. Note the device password given on the label on the back of the new PowerLine device.
2. Plug the new PowerLine device into an AC power outlet.
3. Start the PowerLine encryption utility on the remote computer and select the Security tab.
4. Click Use Default (Public Network). The password in the Private Network Password text box
changes to the default password, HomePlug.
5. Click Set All Devices.
6. Select the Main tab and wait for the new PowerLine device to be listed.
7. Select the new PowerLine device from the device list, and click Enter Password.
8. In the pop-up window, enter the password from the back label of the device and click OK.
9. Select the Security tab.
10. Re-enter the network password in the Private Network Password text box, and then click Set
All Devices.
14
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
Troubleshooting
This chapter gives information about troubleshooting your XET1001 85 Mbps Wall-Plugged
Ethernet Adapter. After each problem description, instructions are provided to help you diagnose
and solve the problem.
NETGEAR Product Registration, Support, and Documentation
Product updates and Web support are available at:
When the PowerLine adapter is connected to the Internet, click the Knowledge Base or the
Documentation link under the Web Support menu to view support information or the
documentation for the PowerLine adapter.
Basic Functioning
After you plug in the PowerLine adapter, the following sequence of events should occur:
1. When power is first applied, verify that the Power light is on.
2. After approximately 10 seconds, check the LEDs on the PowerLine adapter. The following
should occur:
a. The power LED is solid green.
b. The blue HomePlug LED is lit.
c. The Ethernet LED blinks.
If any of these conditions does not occur, refer to the appropriate following section.
Power Light Not On
Make sure that, if power to the AC power outlet is controlled by a wall switch, the wall switch is in
the on position.
Verify that the wall socket is live. To do this, disconnect the PowerLine adapter and plug in another
electrical product, such as a lamp or a hairdryer.
15
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
If the Power LED still does not come on, and you have confirmed the power outlet is live, you
have a hardware problem and should contact technical support.
HomePlug Light Not On
If the power light is on but the HomePlug light is not, check the following:
•
Make sure that power is being provided to more than one PowerLine device. Another
PowerLine device must be installed for successful communication across the PowerLine.
•
Verify that the network password is the same on all devices in the PowerLine network.
Ethernet Light is Off
•
•
Make sure that the Ethernet cable is plugged in properly at both ends.
Be sure that you are using the correct cable on the router that the first PowerLine adapter is
connected to. When connecting the router’s Internet port to a cable or DSL modem, use the
cable that was supplied with the cable or DSL modem. This cable could be a standard straight-
through Ethernet cable or an Ethernet crossover cable.
•
On the attached Ethernet device or network adapter card, check that the Link light is on.
16
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
Technical Specifications
This section provides default settings and technical specifications for the XET1001 85 Mbps Wall-
Plugged Ethernet Adapter.
Default Configuration Settings
Table 2-1. PowerLine Device Default Configuration Settings
Feature
Description
Encryption Utility
Network
Enabled
Port Speed
Auto-negotiation
Auto-negotiation
Port Duplex
Administration
Device password
Management IP Configuration
PowerLine
See product label.
DHCP
Encryption password
HomePlug
Technical Specifications
Power Requirements
Dimensions
100~240V AC
98mmx 72mm x 40mm (Height x Width x Depth)
0.146kg
Weight
Operating temperature
Operating humidity
Powerline standard
HomePlug Frequency
Data Encoding
32° to 104° F (0° to 40°C)
90% maximum relative humidity, noncondensing
HomePlug 1.0
4.3-20.9 Mhz
HomePlug 1.0: Othogonal Frequency Division Multiplexing (OFDM),
DQPSK, DBPSK, ROBO
17
v1.0, January 2008
XET1001 Wall-Plugged Ethernet Adapter User Guide
HomePlug Security
DES (56 bit)
Electromagnetic emmissions FCC Part 15 Class B; CE-EMC Class B
Power and Safety
UL Listed (UL 1950) /cUL IEC950; CE LVD
18
v1.0, January 2008
Images/NetgearLogo.jpg @ 96 dpi i
images/HDXB101_images_13April06.jpg @ 300 dpi i
images/icon_pointer.gif @ 96 dpi 1
images/icon_warning.gif @ 200 dpi 1
images/icon_danger.gif @ 200 dpi 1
images/Fig2-1Front.jpg @ 96 dpi 4
images/Power_ai11_091304.ai 4
images/Powerline_ai11_091304.ai 4
images/Ethernet_ai11.ai 4
images/power strip [Converted]_rotated.eps 6
images/XE103+Router [Converted].ai 7
Images/XET1001MainNavScreen.jpg @ 96 dpi 9
images/XE104Install_1.jpg @ 96 dpi 10
images/Fig2-7_XE104Install1A.jpg @ 96 dpi 10
images/Fig2-8_XE104Install_1B.jpg @ 96 dpi 11
images/Fig2-9_XE104Install_1C.jpg @ 96 dpi 11
images/Fig2-10_XE104Install_1D.jpg @ 96 dpi 11
images/PowerlineUtilMainTab.jpg @ 96 dpi 12
images/PowerlineUtilDevPW.jpg @ 96 dpi 13
images/PowerlineUtilSecurityTab.jpg @ 96 dpi 13
1
v1.0, January 2008
2
v1.0, January 2008
|