Nady Systems Microphone SPC 15 User Manual

SPC-15 Condenser Microphone  
USER GUIDE  
To take full advantage of the superb features of the SPC-15, and to enjoy  
long and trouble-free use, please read this User’s Guide carefully.  
Congratulations on purchasing the Nady SPC-15 Condenser Microphone — the first general purpose handheld vocal micro-  
phone of its kind to feature a studio quality large diaphragm condenser element. The SPC-15 is a versatile, professional level  
microphone, perfect for all live entertainment, recording, and broadcast applications requiring uncompromised studio quality  
sound.  
UNPACKING, INSPECTION, STORAGE AND TRANSPORT  
Your SPC-15 microphone was carefully packed at the factory, and the shipping carton was designed to protect the unit during  
shipping. Please examine your microphone before using and retain the external shipping package for reuse should you ever  
need to return your microphone for servicing. A foam padded plastic carrying case is provided for safe, convenient transport and  
storage.  
OPTIONAL ACCESSORIES  
• 48V phantom power supply (SMPS-1)  
STANDARD ITEMS SUPPLIED  
• SPC-15 microphone  
• Microphone clip  
• Foam windscreen  
• User Guide  
• Warranty card  
• Foam padded plastic  
carrying case  
FEATURES  
• Pressure gradient back electret condenser and  
transformerless FET circuitry for transparent audio  
reproduction and superior transient response  
• Wide frequency response (50~18,000Hz) with specially  
tailored mid-high presence for enhanced vocal and  
instrument punch and exceptional crisp, clear sound  
• Supercardioid polar pattern for maximum feedback rejection,  
superior sensitivity, wide dynamic range, high (136dB) SPL  
capacity and ultra-low distortion  
• Advanced internal shockmount design to eliminate handling  
noise  
• Compact all-brass housing—lightweight, roadworthy and  
durable for long life and reliability  
• Gold plated XLR connector  
• Requires 9~52V phantom power  
• 1.57" Diam. x 6.37" (40 Diam. x 162 mm), 6.25 oz (175g)  
CONNECTING THE SPC-15  
The SPC-15 can be used in live sound reinforcement and  
broadcasting and in studio or live recording. It must be  
powered by 48V phantom power (such as supplied by the  
optional Nady SMPS-1 phantom power supply or a mixing  
console with phantom powering), and amplified by a  
microphone pre-amp (such as built into a mixer, or a stand-  
alone unit).  
The SCP-15 can be connected to your mixer or phantom  
power supply using a standard balanced 3-pin XLR  
microphone cable. Before connecting to a mixer directly, turn  
the channel to which you’re connecting to its lowest gain  
setting. If you are using the Nady SMPS-1 Phantom Power  
Supply, connect in the following order:  
1. Connect the SPC-15 to the SMPS-1  
(Note: Make sure to set the pre-amp to the proper gain level-  
too much gain may distort subsequent amplifiers and too little  
may result in a noisy signal)  
2. Connect the SMPS-1 Signal Output to your mixer  
3. Connect the SMPS-1 to the AC power supply (115-230VAC)  
4. Turn on the SMPS-1 Power ON/OFF switch  
5. Slowly turn up the channel gain in your mixer to the  
desired level  
 

Miele Cooktop CS 1326 Y User Manual
Miele Dishwasher G 2183 User Manual
Miele Dishwasher G 5795 User Manual
Milwaukee Impact Driver 58 01 1830 User Manual
Mr Coffee Coffeemaker JWX31 User Manual
MTD Automobile Parts AC3 User Manual
Oregon Scientific Light Therapy Device E8612 User Manual
Panasonic Camera Flash DMW FL360L User Manual
Panasonic Digital Camera AW PH350 User Manual
Panasonic Garage Door Opener CZ RE2C2 User Manual