New Holland
82LB and 84LB Loader Specifications
82LB 84LB
KEY LOADER DIMENSIONS
82LB*
143.8 (3652)
135.4 (3439)
110.3 (2802)
41.7 (1059)
60°
84LB*
157.8 (4008)
148.8 (3780)
123.8 (3144)
61.7 (1567)
75°
A
B
C
D
E
Maximum lift height to pivot pin, in. (mm)
Maximum lift height under level bucket, in. (mm)
Clearance with bucket dumped, 45 degree, in. (mm)
Reach (from tire), max lift height, bucket 45 degree, in. (mm)
Maximum dump angle
F
Reach with bucket on ground, in. (mm)
Maximum rollback angle
90 (2285)
28°
122 (3105)
20°
G
H
J
Digging depth, in. (mm)
Maximum bucket height (standard bucket), in. (mm)
Rollback angle at full height
3.2 (81.2)
176.1 (4470)
40°
4.2 (106.6)
190.1 (4830)
62°
R
Lift capactiy to max height at pivot, lbs.
Lift capactiy to max height 31.5 in. ahead of pivot, lbs.
Bucket rollback force at ground 31.5 in. ahead of pivot, lbs.
6,400
6,150
4,050
4,400
6,440
12,000
*Values assuming GoodYear Versa Torque 480/85R34 tires and 1.5 cu.yd. bucket
R
43°
45°
E
D
J
A B C
F
G
H
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
vary outside these areas.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
© 2009 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 1of 1
|