RETRO SNOW CONE MACHINE™
Model # RSM-602
ꢀ For Household Use Only
Read These Instructions Before Using
This Unit!
Save These Instructions!
ENGLISH
2
IMPORTANT PRECAUTIONS
Appliance Specifications:
120 Volts
60HZ
9 Amps
35 Watts
ETL Approved
Important Precautions to Remember:
A.
B.
C.
D.
E.
F.
NEVER immerse in water.
NEVER use near water.
NEVER use an abrasive sponge, cloth or scouring pad on the unit.
NEVER leave unit unattended while in use.
Unplug unit from outlet when not in use and when cleaning.
DO NOT operate this appliance with a damaged cord or plug or in the event the
appliance ever malfunctions.
G.
H.
This unit is NOT A TOY.
This appliance is not intended for use by young children or infirm persons without
supervision.
INTRODUCTION
Thank you for purchasing The RETRO SNOW CONE MACHINEꢀ. This nostalgic looking
snow cone maker resembles the popular Retro designs of the 1950’s. This snow cone
maker is only designed in appearance to look like the nostalgic design style; however, it is
a technologically advanced snow cone maker.
The RETRO SNOW CONE MACHINEꢀ uses ice cubes from your freezer to create:
ꢀ
ꢀ
ꢀ
Snow Cones
Slush’s
Smoothies, Low Fat Snacks
The RETRO SNOW CONE MACHINEꢀ is designed for kitchen use but can be used
anywhere such as;
ꢀ
ꢀ
ꢀ
ꢀ
Family Room
Dorm Rooms
Office
Club House
And more…
Now you can enjoy icy cool snow cones and more to snack on…
ꢀ
ꢀ
ꢀ
ꢀ
Watching TV or a movie at home
Parties
Listening to music
As a low fat treat
And more…
ENGLISH
3
INTRODUCTION
The RETRO SNOW CONE MACHINEꢀ is easy to use, just follow these simple
instructions.
After Taking the Unit Out Of the Box
1.
Your RETRO SNOW CONE MACHINEꢀ is already fully assembled, but has three
separate bonus pieces.
ꢀ
ꢀ
ꢀ
1 side cone shelf
2 plastic cone holders (Paper cones not provided)
1 plastic shaved ice scoop
2.
Before first use, lift off the clear safety power control lid, and remove the ice shaving
canister. Remove the top housing lid off of the body and wipe clean the inside of
the shaved ice collection chamber with a non-abrasive moist sponge, towel or cloth
and then dry with a non-abrasive soft towel or cloth.
BREAKDOWN of parts ILLUSTRATION A
E. Shaved
Ice
Collection
Chamber
A. Housing Top lid
F. Ice Feed
insert
B. Cone Holders
G. Ice shaving
Canister
C. Shaved ice scoop
H. Locking
cap for
Ice shaving
canister
D. Side cone shelf
H. Clear
Safety power
control lid
3.
4.
After cleaning the inside of the shaved ice collection chamber, put the housing top
lid back on the ice collection chamber and base unit.
Locate the Ice Shaving canister. Unscrew and remove the center locking cap (This
cap has “LOCK and UNLOCK” with directional arrows, clearly marked on the top)
Separate the Ice Feed Insert from the Ice Shaving Canister. Carefully wash these
parts in warm soapy water. Use extreme caution when cleaning and handling the
Ice Shaving Canister. Blades are very sharp! Rinse and dry with a soft clean cloth.
Reassemble the Ice Shaving Canister and lock the center locking cap securely.
Return the Ice Shaving Canister to the receptacle hole in the top housing lid. Wash
and dry the Clear Safety power control lid, and reposition over the Ice Shaving
Canister.
5.
Attach the Side Cone Shelf. NOW, you are ready to enjoy cool, refreshing icy
snacks from your RETRO SNOW CONE MACHINE™.
ENGLISH
4
USING YOUR RETRO SNOW CONE MACHINE™
First, find a stable surface near an electrical outlet to place your snow cone machine.
(Make sure your cord is away from any water source. If needed, it is acceptable to use an
extension cord.)
A.
Before plugging in your unit, to add ice cubes, remove clear power control lid
from your RETRO SNOW CONE MACHINE™, by turning clockwise, lift and
remove.
B.
Place ice cubes in the ice feed canister allowing
enough room for the clear power control lid to be
placed back on easily.
ILLUSTRATION B
Ice Feed Canister with ice
C.
D.
Plug in unit with lid in the OFF position.
Turn the clear power control lid counter clockwise, to the ON position. This will
activate the unit to begin shaving (To turn “OFF” shaving unit, simply turn the lid
clockwise.)
NOTE: “ON” / “OFF” is clearly marked on the clear power control lid with directional
arrows. See illustration C below.
ILLUSTRATION C
E.
F.
Turn the clear power control lid clockwise
to turn off the unit and refill the ice feed unit
with ice. Repeat STEPS D and E until you
have shaved the amount of ice desired.
Use the shaved ice scoop to shovel shaved
ice from the collection chamber (accessible through the side door) to your cone
to create your favorite treats. We have included a few recipes on page 5 of this
manual to enhance the enjoyment of your snow cone machine or use your
imagination and create your own recipes.
ILLUSTRATION D
Showing designed use of cone shelf and
Plastic cone holders. (Paper cones not
Included)
Whatever you create, we are sure the RETRO SNOW CONE MACHINE™ will make it fun
for the whole family!
ENGLISH
5
CLEANING
1.
Make sure unit is unplugged before cleaning.
NOTE: The top of the unit (housing the motor and electrical cord) is easily removed
making the inside of the shaved ice collection chamber accessible.
2.
Lift off and remove the top housing lid and clean and dry inside shaved ice
collection chamber of the unit.
3.
The Ice Feed Insert, Ice Shaving Canister, Locking Cap and Clear Power Control
Lid are dishwasher safe.
IMPORTANT The Ice Shaving Canister Blade is very sharp! When cleaning and handling,
use EXTREME CAUTION!
4.
Use slightly damp, non-abrasive sponge, cloth or towel to wipe clean outside of
unit, dry with a non-abrasive cloth.
The shelf on the outside of the unit is also removable for washing.
Display your RETRO SNOW CONE MACHINE™ with pride and have a cool day!
RECIPES
Your RETRO SNOW CONE MACHINEꢀ makes light and fluffy mounds of shaved ice that
can be used to make;
SNOW CONES – Just add your choice of your favorite flavored
syrup. Add more than one flavor to increase the fun and vary
the flavor by creating Rainbow Snow Cones.
ILLUSTRATION E
Adding flavored syrup to your snow cone
SLUSH DRINKS –Fill a glass with freshly shaved ice and add
your favorite soft drink, flavored tea or fruit juices.
FRUITY SLUSH – Fill a mug with freshly shaved ice, add flavored syrup and top with
chopped fruit of your choice.
YOGURT SNOW – Pre - freeze your favorite flavored yogurt in ice cube trays. When
frozen, you can use your RETRO SNOW CONE MACHINEꢀ to shave the yogurt cubes
and make a refreshing, healthy treat. Add flavored syrup for even more flavor.
SNOW SMOOTHIES – Freeze 6 ounces of milk in ice cube trays. Once the milk cubes are
frozen, use your RETRO SNOW CONE MACHINEꢀ to shave the milk cubes. Place the
shaved milk cubes and a handful of fresh strawberries (or your choice of fruit) in a blender.
Add 1 Tbs. of sugar for sweetness, blend until smooth to your desired consistency.
JUICY TREATS – Freeze your favorite juice in ice cube trays, once they are frozen, use
your RETRO SNOW CONE MACHINEꢀ to shave the cubes and create a healthy, juicy
treat.
Use your imagination with different fruits, syrups, sodas, teas and juices to create any
number of refreshing, icy, healthy, low fat treats, drinks, and desserts that will delight kids
of any age
ENGLISH
6
RETURNS & WARRANTY
SHOULD YOUR UNIT NOT WORK OR IS DAMAGED WHEN YOU FIRST TAKE IT OUT OF
THE BOX, PLEASE RETURN IT TO THE PLACE OF PURCHASE IMMEDIATELY.
Should you have any questions, please contact us via email or at the customer service number
listed below between the hours of 8:00 AM and 5:00 PM, Monday through Friday, Central
Standard Time.
Distributed by:
Nostalgia Products Group LLC
1471 Partnership Dr.
Green Bay, WI 54304-5685
Customer Service
Phone: (920) 347-9122
Customer Service Inquiry
Customer Service Inquiry form and click the Submit button. A representative will
contact you as soon as possible.
RETRO SNOW CONE MACHINE™
RSM-602
Limited Warranty
This appliance is designed and built to provide many years of satisfactory performance under
normal household use. The distributor pledges to the original owner that should there be any
defects in material or workmanship during the first 90 days of purchase, we will repair or replace
the unit at our option. Our pledge does not apply to damages caused by shipping, mishandling or
unit being dropped. A product deemed defective either from manufacturing or being mishandled
is up to the distributor’s discretion. To obtain service under this warranty, return this unit to
Nostalgia Products Group, LLC at the address above, shipping prepaid. You must also include a
copy of the original receipt along with your name, address and phone number. Include a
description of the defect along with the date you purchased the product.
This warranty does not apply to re-manufactured merchandise.
Please read these instructions carefully. Failure to comply with these instructions, damages
caused by improper replacement parts, abuse or misuse will void this pledge to you and is being
made in place of all other expressed warranties.
Nostalgia Products Group LLC
1471 Partnership Dr.
Green Bay, WI 54304-5685
Visit Us Online at
©2009 Nostalgia Products Group LLC
Rev. 6/16//09
|