2-Dimensional Code Reader (Fixed Type)
V530-R160E, EP
A Code Reader that Handles Pin-Stamped
Markings!
Features
Dependably Read Pin-Stamped Markings
• Markings made by pin-stamping machines can be dependably
read, providing the user with a wider range of selection of marking
devices.
Dependably Read Markings at an Angle
With dependable reading at an angle, installation is possible even on
existing facilities with space limitations.
• Stable reading is possible even if the shape of cells changes
because of aging in the marking device.
(Reference: Samples were made using a Vector Co. pin-stamping
machine)
Easy Setup
Setup is easily achieved with a Memory Card (compact flash mem-
ory) slot on the V530-R160E and V530-R160EP. Just insert a card to
easily copy settings or save images. There is no need to carry a per-
sonal computer and cables for process switch-overs.
Dot Codes* Read at Any Angle: 360°
Compatibility
• Codes can be read even with rough backgrounds on the casting
surface or other locations.
• Dot codes* can be read at any angle through a 360° range.
* Dot codes are 2-dimensional codes in which dots form the cells.
2
2-Dimensional Code Reader (Fixed Type) V530-R160E, EP
Ordering Information
■ List of Models
Item
Description
Model
V530-R160E, V530-R160EP
F150-KP-2D 2M
F150-S1A-2D
Controller
---
Console
2-m cable
---
Camera
Camera Cable
Monitor Cable
Liquid Crystal Monitor
Video Monitor
Parallel Cable
Memory Card
3-m cable
2-m cable
---
F150-VS-2D 3M
F150-VM-2D 2M
F150-M05L-2D
F150-M09-2D
---
Cable with loose wires for Parallel I/O Connector (2-m cable)
Card capacity: 64 MB
F160-VP
F160-N64S(S)
Card capacity: 128 MB
QM300-N128S
XW2Z-200S-V
RS-232C Cable
For IBM PC/AT or compatible computer (2-m cable)
For SYSMAC PLC (2-m cable)
XW2Z-200T
Specifications
V530-R160E, V530-R160EP Controller
Item
Specifications
V530-R160EP
PNP
Model
V530-R160E
NPN
Input/Output type
Applicable codes
Data Matrix ECC200: 10 × 10 to 64 × 64, 8 × 18, 8 × 32, 12 × 26, 12 × 36, 16 × 36, 16 × 48
Data Matrix ECC000, ECC050, ECC080, ECC100, ECC140: 9 × 9 to 25 × 25
QR Code (Model 1, 2): 21 × 21 to 41 × 41 (Version 1 to 6)
Readable direction
360°
Number of pixels (resolution)
512 (H) × 484 (V)
Number of connectable cameras 2 max.
Image memory function
Operation method
Processing method
Memory Card slot
Monitor interface
Serial communications
Parallel I/O
Maximum of 35 images stored (internal memory in Controller).
Selected from menu.
Gray
1
1 channel (color/monochrome)
RS-232C/422A, 1 channel
5 inputs:
TRIG-A, TRIG-B, TRIG-C, TRIG-D, and RESET
6 outputs: RUN, ERROR, OK/NG, BUSY, GATE, and ALARM
20.4 to 26.4 VDC
Power supply voltage
Current consumption
Ambient temperature
Ambient humidity
Weight
Approx. 1.6 A max.
Operating: 0 to 50°C, storage: −25 to 65°C (with no icing or condensation)
35% to 85% (with no condensation)
Approx. 570 g
F150-S1A-2D Camera
Item
Picture element
Effective pixels
Shutter function
Specifications
1/3-inch CCD
659 (H) × 494 (V)
Electronic frame shutter
Shutter speed: 1/100, 1/500, 1/2000, or 1/10000 s (menu selectable)
Ambient temperature
Ambient humidity
Weight
Operating: 0 to 50°C, storage: −25 to 60°C (with no icing or condensation)
35% to 85% (with no condensation)
Approx. 80 g
4
2-Dimensional Code Reader (Fixed Type) V530-R160E, EP
Monitor
Item
Model No.
Liquid Crystal Monitor
F150-M05L-2D
Video Monitor
F150-M09-2D
Size
5.5 inches
9 inches
Type
Liquid crystal color TFT
320 × 240 dots
Monochrome CRT
Resolution
Input signal
800 TV lines min. (at center)
NTSC composite video (1.0 V/75 Ω)
20.4 to 26.4 VDC
Power supply voltage
Current consumption
Ambient temperature
85 to 264 VAC
Approx. 700 mA
Approx. 200 mA
Operating: 0 to 50°C, storage: −25 to 65°C
Operating: −10 to 50°C, storage: −20 to 65°C
(with no icing or condensation)
(with no icing or condensation)
Ambient humidity
Operating/Storage: 35% to 85%
(with no condensation)
Operating/Storage: 10% to 90%
(with no condensation)
Weight (Monitor only)
Accessories
Approx. 1 kg
Approx. 4.5 kg
Operation manual, 4 mounting brackets
Operation manual
System Configuration
Synchronous Sensor
F150-KP-2D-2M
Console
Programmable Controller
RS-232C Cable for SYSMAC PLC:
XW2Z-200T
Personal Computer
RS-232C Cable for DOS Computer:
XW2Z-200S-V
V530-R160E
V530-R160EP
Controller
F160-VP
Parallel Cable
Cameras
F150-VS-2D 3M
Camera Cable
F150-S1A-2D
Camera
Monitors
Memory Cards
64 MB: F160-N64S(S)
128 MB: QM300-N128S
F150-M05L-2D
Liquid Crystal Monitor Video Monitor
(Color) (Monochrome CRT)
F150-M09-2D
F150-VM-2D 2M
Monitor Cable
(See
note.)
Recommended
Power Supply:
OMRON S82K-05024
Note: F150-M09-2D does not conform to EC Directives.
2-Dimensional Code Reader (Fixed Type) V530-R160E, EP
5
Dimensions
Note: All units are in millimeters unless otherwise indicated.
V530-R160E, V530-R160EP Controller
12
60
56
60
12
Four, M3 mounting holes
with depth of 4.8
Four, M3 mounting holes
with depth of 4.8
110
9
92
Four, M4 mounting holes with depth of 6
F150-S1A-2D Camera
F150-KP-2D-2M Console
13
15.5
50
1.5
48
(40)
8
25
31
ESC
TRIG
ENT
14.5
F150-S1A
F150 lighting
connector
87
40
37
SHIFT
11
F150-KP
CONSOLE
1.5
30.5
V530-R160 connector
12 dia.
12.5
5
2000
23
10
31.25
16.75
Two, M4 mounting holes with depth of 8
Mounting dimensions
1/4-20UNC with depth of 8
F150-M09-2D Video Monitor
21.25
20
6.75
F150-M05L-2D Liquid Crystal Monitor
222
250
Allowable panel thickness for mounting:
1.6 to 4.8
(46 max.)
Mounting bracket
233
143
(155)
(145)
SYNC
132
143
50min
50
5
190
160
(5.5)
22
(100)
185
F150-VM-2D Monitor Cable
42.2
• Tolerance: 1 mm
• Dimensions inside parentheses ( ) are reference values.
174
mm
133.5+0.5
0
Panel cutout diagram
mm
175.5+0.5
0
6
2-Dimensional Code Reader (Fixed Type) V530-R160E, EP
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
2-Dimensional Code Reader (Fixed Type) V530-R160E, EP
7
Terms and Conditions
of all possible uses of this product, nor is it intended to imply that the
uses listed may be suitable for this product:
WARRANTY, LIMITATIONS OF
LIABILITY
WARRANTY OMRON’s exclusive warranty is that the products are
free from defects in materials and workmanship for a period of one
year (or other period if specified) from date of sale by OMRON.
• Outdoor use, uses involving potential chemical contamination or
electrical interference, or conditions or uses not described in this
catalog.
• Nuclear energy control systems, combustion systems, railroad sys-
tems, aviation systems, medical equipment, amusement machines,
vehicles, safety equipment, and installations subject to separate
industry or government regulations.
OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE
OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES
THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL
SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED
USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED.
• Systems, machines and equipment that could present a risk to life
or property.
Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING
THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS
PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSI-
BLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CON-
NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED ON CONTRACT, WARRANTY, NEGLIGENCE OR STRICT
LIABILITY.
PROGRAMMABLE PRODUCTS OMRON shall not be responsible
for the user’s programming of a programmable product, or any con-
sequence thereof.
In no event shall responsibility of OMRON for any act exceed the indi-
vidual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WAR-
RANTY, REPAIR OR OTHER CLAIMS REGARDING THE PROD-
UCTS UNLESS OMRON’S ANALYSIS CONFIRMS THAT THE
PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED
AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION,
ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR
REPAIR.
DISCLAIMERS
PERFORMANCE DATA Performance data given in this catalog is
provided as a guide for the user in determining suitability and does
not constitute a warranty. It may represent the result of OMRON’s
test conditions, and the user must correlate it to actual application
requirements. Actual performance is subject to the OMRON War-
ranty and Limitations of Liability.
APPLICATION CONSIDERATIONS
SUITABILITY FOR USE OMRON shall not be responsible for confor-
mity with any standards, codes or regulations which apply to the
combination of the product in the customer's application or use of the
product.
CHANGE IN SPECIFICATIONS Product specifications and accesso-
ries may be changed at any time based on improvements and other
reasons. It is our practice to change part numbers when published
ratings or features are changed, or when significant construction
changes are made. However, some specifications of the product may
be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your appli-
cation. Please consult with your OMRON representative at any time
to confirm actual specifications of purchased product.
At the customer's request, OMRON will provide applicable third party
certification documents identifying ratings and limitations of use
which apply to the product. This information by itself is not sufficient
for a complete determination of the suitability of the product in combi-
nation with the end product, machine, system, or other application or
use.
ERRORS AND OMISSIONS The information in this catalog has
been carefully checked and is believed to be accurate; however, no
responsibility is assumed for clerical, typographical or proofreading
errors, or omissions.
The following are some examples of applications for which particular
attention must be given. This is not intended to be an exhaustive list
Complete terms and conditions for product purchase and use are on Omron’s website at
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, divide by 25.4
OMRON ON-LINE
OMRON ELECTRONICS LLC
One Commerce Drive
Schaumburg, IL 60173
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
847-843-7900
416-286-6465
For US technical support or other inquiries:
800-556-6766
5/03
Specifications subject to change without notice
Printed in USA
Cat. No. GC RFID 4
8
2-Dimensional Code Reader (Fixed Type) V530-R160E, EP
|