One for All Universal Remote ONE FOR ALL User Manual

FEATURE - FUNCTION

The Light (LED) flashes red to show

URC 5800

Cinema 5+

that the remote is working and is sending a signal.

The SETUP key is used to program your

Cinema 5.

The POWER key controls power ON and OFF the

same as the POWER key on your original remote.

Please note that most CD Players do not have an

ON/OFF function on the original remote control. If

this is the case with your CD Player, then POWER

will have no effect on your CD Player.

User Guide

OVERVIEW

™

Thank you for purchasing the One For All Cinema 5 uni-

versal remote control with learning. Along with being a com-

plete Home Theater universal remote, the Cinema 5’s

sophisticated technology will allow you to finally consolidate

the clutter of all of the original remotes in your home enter-

tainment system. Through patented learning technology, you

can teach your Cinema 5 the unique features of your original

remotes and create the complete universal remote control –

only from One For All.

The TV, VCR, CBL/SAT, DVD/LD or RCVR keys

are used to select the home entertainment compo-

nent you want to control. If your component does

not respond when you press a key on the remote

control, press the appropriate device key (TV,

VCR, CBL/SAT, DVD/LD or RCVR) first to tell the

remote control which component you would like

the remote to operate.

Before you can use your new remote control, you will need

to program it to operate the specific home entertainment

components you wish to control. Follow the instructions

detailed in this manual to set up your Cinema 5 and enjoy

your new remote control.

The VOL (Volume Up), VOL (Volume Down)

and MUTE keys control the volume the same as

the Volume Up and Down and Mute keys on your

original remote.

FEATURES AND FUNCTIONS

The illustration below and the chart on the next three pages

describe the features and functions of the Cinema 5 univer-

sal remote control. Use the drawing to locate each feature of

the remote, then refer to the chart for a description of what

function each feature performs.

The CH (Channel Up) and CH (Channel

Down) keys change channels the same as the

Channel Up and Down keys on your original

remote. The CH

keys also control the fol-

lowing functions in other modes: DVD/LD

mode = Skip Forward/ Skip Reverse, RCVR, AUX

and CD mode = Preset Up/Preset Down.

CBL/SAT

The Digit keys (0-9) control direct channel access

the same as the Digit keys on your original

remote. The Digit keys (0-9) may also control the

following functions in other modes: RCVR and

AUX modes = Input Selections.

RCVR

DVD/LD

The ENTER key operates the same as the Enter

key on your original remote. If your original remote

control required you to use an Enter key to change

channels, use the ENTER key on the Cinema 5

after entering your channel number. The ENTER

key may also control the following functions in

other modes: RCVR and AUX modes = TAPE

MON.

The PREV CH (Previous Channel) key operates

the same as the Last Channel or Recall key on

your original remote. The PREV CH key may also

control the following functions in other modes:

DVD/LD, RCVR and CD mode = Random.

The CH ꢀꢀ/ ꢀ, VOL ꢀꢀ/ ꢀ, MUTE, PREV CH

and Digit (0-9) keys are made of a phosphores-

cent material that glows-in-the-dark. Expose the

keys to bright light to activate the glow-in-the-dark

feature. The length of time the keys remain illumi-

nated will be determined by the length of time the

remote is exposed to bright light.

SET

Locate the brand name of your TV in the “Setup Codes For

TVs” section (starting on the next page), and write it in the

space below.

Electroband

Emerson

0000, 0185

0463, 0236, 0180, 0019, 0154, 0177,

0178, 0179, 0185, 0282, 0039, 0624

Envision

Fisher

Fujitsu

Funai

Futuretech

0030

0154, 0159

0179

0171, 0179, 0180

TV Brand:__________________________________________

The brands are listed in alphabetical order with the most

popular codes listed first. You will use one of these codes to

program your Cinema 5 to operate your TV as follows:

0180

0047, 0051, 0451, 0021, 0178, 0282,

0135, 1147, 1347

0019, 0030, 0017

0019, 0030, 0178, 0039

0053, 0056

0179, 0180

0178

0180

0145, 0151, 0056

0054

0000

0053

0180

0019, 0030

0024

Turn on your TV.

Gibralter

Goldstar

Gradiente

Grunpy

Hallmark

Harvard

Hitachi

Infinity

JBL

JCB

JVC

KEC

Kenwood

Kloss

On the Cinema 5, press TV and release. Press

and hold SETUP until the red light blinks twice,

then release SETUP.

Enter the first four-digit TV code listed for your

brand. If performed correctly, the red light will blink

twice when you enter the final digit.

Aim the Cinema 5 at your TV and press POWER.

The TV should turn off. If it does not respond,

repeat steps 2-4, trying each code listed for your

brand until you find the one that operates your TV.

NOTE: If you have tried all the codes listed for

your brand and your TV does not respond, try

using ”SEARCHING FOR YOUR CODE”.

KTV

Logik

0030, 0180, 0185, 0032

0056

0016

Luxman

LXI

Magnasonic

0056

Your Cinema 5 is now programmed to operate

your TV. Write your TV code in the boxes to the left

for future reference.

0047, 0054, 0154, 0156, 0178

0179, 0030, 0092, 0093, 0019, 0003,

0054, 0156

Magnavox

Majestic

Marantz

Matsushita

Megatron

MEI

0054, 0096, 0187, 0030, 0179, 0171

0016

0054, 0030

0250

0145, 0178

0185

Remember, if you want to use your Cinema 5 to operate

Memorex

MGA

Midland

Minutz

0056, 0150, 0154, 0016, 0178

0150, 0019, 0030, 0178

0017, 0047, 0051, 0135, 0039

0021

your TV, press the TV key first.

Setup Codes For TVs

Mitsubishi

Motorola

MTC

Multitech

NAD

NEC

Nikko

NTC

Onwa

Optimus

Optonica

Orion

Panasonic

Penney

0150, 0093, 0019, 0178

0093

0060, 0019, 0030, 0056, 0185

0180

0156, 0166, 0178

0019, 0030, 0056

0030, 0092, 0178

0092

0180

0250, 0154, 0166

0093, 0165

0236, 0436

0250, 0051

0047, 0156, 0051, 0030, 0019, 0021,

0060, 0135, 0178, 0039, 1347

0054, 0145, 0096, 0019, 0030

0054

0019, 0030, 0039

0166

0092, 0019, 0039

0051

0047

Admiral

Aiko

Akai

Alaron

Ambassador

Ampro

0093, 0179, 0180, 0016, 0047

0092

0030

0179

0177

0751

0180

0019, 0185, 0003

0451, 0092, 0180, 0003

0180

0017, 0030, 0179

0019

0154, 0016

0180

0019

0056, 0030

0030

0054

0000

0451, 0092

0060, 0092, 0030, 0056, 0039

0185

0056

0180, 0185

0180

0180, 0039

0030, 0060, 0154, 0039, 0466, 1147, 1347

0180

0451, 0092, 0019, 0039, 0624

0019

0145

0017, 0019

0720, 0774

Anam

AOC

Audiovox

Baysonic

Beaumark

Belcor

Bell & Howell

Bradford

Brockwood

Candle

Carnivale

Carver

Celebrity

Cineral

Citizen

Clairtone

Concerto

Contec

Craig

Crown

Curtis Mathes

CXC

Daewoo

Daytron

Denon

Dumont

Dwin

Philco

Philips

Pilot

Pioneer

Portland

Prism

Proscan

Proton

Pulsar

0178, 0466

0017, 0019

Quasar

RadioShack

0250, 0051, 0165

0047, 0056, 0154, 0019, 0030, 0165,

0178, 0180, 0039

0047, 0019, 0090, 0135, 1047, 1147,

1247, 1347

0056, 0154, 0019, 0030, 0165, 0178,

0180, 0039

0185

RCA

Realistic

Rhapsody

Runco

Sampo

0017, 0030, 0603

0030, 0039

Samsung

Samsux

Sansei

Sanyo

0060, 0019, 0030, 0056, 0178, 0039

0039

0451

0154, 0159

NOTE: If you have tried all the codes listed for

your brand and your VCR does not respond, try

using “SEARCHING FOR YOUR CODE”.

Scimitsu

Scotch

Scott

0019

0178

Your Cinema 5 is now programmed to operate

your VCR. Write your VCR code in the boxes to

the left for future reference.

0236, 0019, 0178, 0179, 0180

Sears

0047, 0054, 0056, 0154, 0156, 0171,

0178, 0159, 0179

Semivox

Semp

0180

0156

Sharp

0093, 0165, 0039

Remember, if you want to use your Cinema 5 to operate

Shogun

Signature

Simpson

Sony

Soundesign

Squareview

SSS

0019

0016

0187

0000

0178, 0179, 0180

0171

0019, 0180

0180

0000

0054, 0096, 0030

0171

0093

0250, 0051

0179

0051, 0056

0054, 0056, 0060, 0092, 0150, 0016,

your VCR, press the VCR key first.

Setup Codes For VCRs

Admiral

Adventura

Aiko

0048, 0121, 0184, 0039, 0060, 0202

0000

0278

Aiwa

Akai

0037, 0000

0041

Starlite

American High 0035

Supreme

Sylvania

Symphonic

Tandy

Technics

Technol Ace

Techwood

Teknika

Asha

0240

Audiovox

Beaumark

Bell & Howell

Broksonic

Calix

0037

0240

0104

0184, 0209, 0479, 0002, 0121

0037

Canon

0035

Carver

0081

0019, 0179, 0180, 0039

0056

0056, 0177, 0178

0156, 0060, 0154

0185

CCE

0072, 0278

Telefunken

TMK

Toshiba

Tosonic

Totevision

Vector Research 0030

Victor

Vidikron

Vidtech

Viking

Cineral

0278

Citizen

0037, 0278

Colt

0072

Craig

0072, 0240, 0037, 0047, 0271

0039

Curtis Mathes

Cybernex

Daewoo

Denon

0035, 0041, 0060, 0202

0240

0278, 0045

0042

0053

0054

0019, 0178

0046

0016, 0019, 0030, 0054, 0056, 0096,

0165, 0178, 0179, 0021

Dynatech

Electrohome

Electrophonic

Emerex

Emerson

0000

0037

0032

Wards

White

0209, 0184, 0479, 0278, 0000, 0002,

Westinghouse 0451, 0463, 0236, 0180, 0624

Yamaha

Zenith

0036, 0037, 0043, 0068, 0121, 0184, 0212

0019, 0030

0017, 0092, 0016

Fisher

Fuji

Funai

0104, 0047, 0066

0033, 0035

0000

Programming the Cinema 5 to operate your VCR:

Garrard

Goldstar

Go-Video

Gradiente

0000

Locate the brand name of your VCR in the “Setup Codes For

VCRs” section (starting below), and write it in the space

below.

0060, 0035, 0048, 0240

0037, 0038

0432, 0526

0000

VCR Brand: ________________________________________

Harley Davidson 0000

Harman/Kardon 0038

The brands are listed in alphabetical order with the most pop-

ular codes listed first.You will use one of these codes to pro-

gram your Cinema 5 to operate your VCR as folllows:

Harwood

Headquarter

HI-Q

0072, 0068, 0072

0046

0047

Hitachi

Jensen

JVC

KEC

Kenwood

KLH

0041, 0000, 0042

0041

0041, 0067

0037, 0278

0038, 0041, 0067

0072

Turn on your VCR and play a tape.

On the Cinema 5, press VCR and release. Press

and hold SETUP until the red light blinks twice, then

release SETUP.

Kodak

Lloyd’s

Logik

0035, 0037

0000, 0208

0072

0037

0278, 0179, 0171, 0020, 0037, 0072, 0240

0035, 0081, 0000, 0039, 0110, 0149

0240

0035, 0081

Enter the first four-digit VCR code listed for your

brand. If you perform this procedure correctly, the

red light will blink twice when entering the final

digit.

LXI

Magnasonic

Magnavox

Magnin

Marantz

Marta

Matsushita

MEI

Memorex

Aim the Cinema 5 at your VCR and press

POWER.Your VCR should turn off. If your original

VCR remote control did not have a POWER key,

press STOP. Your VCR should stop. If your VCR

does not respond, repeat steps 2-4, trying each

code listed for your brand until you find the one that

operates your VCR.

0037

0162, 0035, 0454

0035

0162, 0240, 0035, 0037, 0104, 0000,

0039, 0046, 0047, 0048, 1037, 1062,

1162, 1262

Programming the Cinema 5 to operate your TV/VCR

Combo:

MGA

0043, 0240

Locate the brand name of your TV/ VCR Combo in the

“Setup Codes For TV/ VCR Combos” section (starting on the

next page), and write it in the space below.

MGN Technology 0240

Minolta

Mitsubishi

Motorola

MTC

0042

0043, 0048, 0067

0035, 0048

0240, 0000

TV/VCR Combo Brand: ____________________________

Multitech

NEC

Nikko

Noblex

Olympus

Optimus

0000, 0072

0038, 0041, 0067, 0104

0037

0240

The brands are listed in alphabetical order with the most

popular codes listed first. You will use one of these codes to

program your Cinema 5 to operate your TV/VCR Combo as

follows:

0035

0162, 0048, 0037, 0104, 0454, 1037,

1062, 1162, 1262

0209, 0184, 0479, 0002

0162, 0035, 0077, 0225, 0454, 1062,

Turn on your TV/VCR Combo.

Orion

Panasonic

Press VCR and release. Press and hold SETUP

until the Cinema 5’s red light blinks twice, then

release SETUP.

1162, 1262

Penney

Pentax

Philco

Philips

Pilot

Pioneer

Proscan

Protec

Pulsar

Quarter

Quartz

Quasar

RadioShack

Radix

0035, 0037, 0038, 0042, 0240

0042

0035, 0209, 0479

0035, 0081, 0110

0037

0067, 0162

0060, 0202

0072

Enter the first four-digit TV/VCR code listed for

your brand in the “Setup Codes For TV/VCR

Combos” section. If you perform this procedure

correctly, the red light will blink twice when you

enter the final digit of your code.

Aim the Cinema 5 at your TV/VCR Combo and

press POWER. The unit should turn off. If it does

not respond, Repeat steps 2-4, trying each code

listed for your brand until you find the one that oper-

ates your TV/VCR Combo.

0039

0046

0162, 0035, 0077, 0454, 1062, 1162, 1262

0000, 0037, 1037, 1062, 1162, 1262

0037

0060, 0240, 0042, 0035, 0048, 0077, 0149

0000, 0035, 0037, 0046, 0047, 0048,

NOTE: If you have tried all the codes listed for

your brand and your TV/VCR Combo does not

respond, try using “SEARCHING FOR YOUR

CODE”.

Randex

RCA

Realistic

0066, 0104

Runco

Samsung

Sanky

Sansui

Sanyo

Scott

0039

0240, 0045

0048, 0039

0000, 0041, 0067, 0271, 0479

0104, 0046, 0047, 0054, 0240

0043, 0045, 0121, 0184, 0210

Your Cinema 5 is now programmed to operate

your TV/VCR Combo. Write your TV/VCR Combo

code in the boxes to the left for future reference.

Sears

0000, 0035, 0037, 0042, 0046, 0047,

0066, 0104

Remember, to use your Cinema 5 to operate your TV/VCR

Semp

0045

Combo, press the VCR key first.

Sharp

0048

0072

0240

0072

Setup Codes For TV/VCR Combos

Shintom

Shogun

Singer

Sony

STS

Sylvania

Symphonic

Tatung

TEAC

Technics

Teknika

Thomas

TMK

American High 0035*

Brocksonic

Colt

0002, 0294, 0479

0072

0032, 0033, 0000, 0035

0042

0035, 0081, 0043, 0000, 0110

0000

0041

0000, 0041

0162, 0035

0000, 0035, 0037

0000

0240, 0036, 0208

0043, 0045, 0066, 0210

0037, 0240

Curtis Mathes

Daewoo

Emerson

Funai

0035*

0278*

0002, 0294, 0479

0000

Hitachi

0035*, 0060*, 0048*, 0240

0035*, 0000

0000

Lloyds

0000

Magnavox

Magnin

Memorex

MGA

0000, 0035*, 0081*

0240

0037, 0162*

0240

Toshiba

Totevision

Unitech

0240

Mitsubishi

Orion

Panasonic

Penney’s

Quasar

RCA

0048*

Vector Research 0038

Vector 0045

Video Concepts 0040, 0045

0002, 0294, 0479

0035*, 0162*

0035*, 0240, 0162*

0035*, 0162*

0035*, 0060*, 0048*

0000, 0479

0240

Videosonic

Wards

0240

0000, 0035, 0042, 0047, 0048, 0060,

0072, 0081, 0149, 0240

Sansui

Sanyo

White

Westinghouse 0278, 0479, 0209, 0184

Sears

Sony

Symphonic

Zenith

0000, 0037

0032*

0000

XR-1000

Yamaha

Zenith

0000, 0035, 0072

0038

0039, 0000, 0033

0000

NOTE: If your TV/VCR works with one of the above codes

highlighted with an asterisk (*), you may need to program a

separate TV code to control the volume. Check the list of

codes below and follow the instructions in the “Programming

the Cinema 5 to Operate Your TV” section to program the

supplied TV code.

Setup Codes for Cable Converters

ABC

0003, 0008, 0014, 0007, 0001, 0011,

0013, 0017

0153, 0315

0022, 0207

0797, 0153, 0022, 0207

0056

Allegro

Gantronix

Archer

Belcor

TV/VCRs working on VCR code 0032 may require

TV code 0000 for volume control.

TV/VCRs working on VCR code 0035 may require

TV code 0051 for volume control.

TV/VCRs working on VCR code 0048 may require

TV code 0093 for volume control.

TV/VCRs working on VCR code 0060 may require

TV code 0047 for volume control.

TV/VCRs working on VCR code 0081 may require

TV code 0054 for volume control.

TV/VCRs working on VCR code 0162 may require

TV code 0250 for volume control.

TV/VCRs working on VCR code 0278 may require

TV code 0451 for volume control.

Cable Star

Cabletenna

Cableview

Century

Citizen

Colour Voice

Comtronics

Contec

0056

0022

0153

0153, 0315

0031

0040

0019

Digi

0637

Eastern

Emerson

Everquest

Focus

0002

0797

0015, 0040

0400

Garrard

0153

GC Electronics 0056, 0207

Programming the Cinema 5 to operate your Cable

Converter or Satellite Receiver:

Gemini

0015

General

Locate the brand name of your Cable Converter or Satellite

Receiver in the “Setup Codes for Cable Converters” or “Setup

Codes for Satellite Receivers” section (starting on the next

page), and write it in either space below.

Instrument

0476, 0003, 0014, 0011, 0276, 0810

Goldstar

Goodmind

Hamlin

0144, 0040

0797

0259, 0009, 0020, 0034

Hitachi

Hytex

Jasco

Jerrold

0011

0007

Cable Converter Brand:____________________________________________________________________________________

________________________________________________

0153, 0315, 0015

0476, 0003, 0014, 0011, 0012, 0015, 0810

Linsay

0440

0027, 0014

0000

0063, 0156

0618

0063, 0156

0007, 0019

0021

0021, 0107, 0000

0637

0000

0153, 0027, 0031

0144, 0023, 0533

Satellite Receiver Brand:______________________________

________________________________________________

Magnavox

Memorex

Movie Time

Novaplex

NSC

The brands are listed in alphabetical order with the most pop-

ular codes listed first.You will use one of these codes to pro-

gram your Cinema 5 to operate your Cable Converter or

Satellite Receiver as follows:

Oak

Optimus

Panasonic

Panther

Paragon

Philips

Pioneer

Popular

Mechanics

Prelude

Pulsar

RadioShack

RCA

Realistic

Recoton

Regal

Turn on your Cable Converter or Satellite

Receiver.

Press CBL/SAT and release. Press and hold SETUP

until the Cinema 5’s red light blinks twice, then

release SETUP.

0400

0770

0000

Enter the first four-digit Cable Converter or

Satellite Receiver code listed. If you perform this

procedure correctly, the red light will blink twice

when you enter the final digit of your code.

0015, 0315, 0797, 0833

0021

0207

0400

0259, 0020

0002

0011

0000

0144, 0040

Aim the Cinema 5 at your Cable Converter or

Satellite Receiver and press POWER.Your Cable

Converter or Satellite Receiver should turn off. If it

does not respond, repeat steps 2-4, trying each

code listed for your brand until you find the one

that operates your Cable Converter or Satellite

Receiver.

Regency

Rembrandt

Runco

Samsung

Scientific Atlanta 0477, 0008, 0017

Seam

Signal

0510

0015, 0040

0011

0040

0021

0003, 0015

0015, 0040, 0797

0015

0001

0258

NOTE: If you have tried all the codes listed for

your brand and your Cable Converter or Sateliite

Receiver does not respond, try using “SEARCH-

ING FOR YOUR CODE”.

Signature

SL Marx

Sprucer

Starcom

Stargate

Starquest

Sylvania

Tandy

Your Cinema 5 is now programmed to operate

your Cable Converter or Satellite Receiver. Write

your Cable Converter or Satellite Receiver code in

the boxes to the left for future reference.

Teleview

Texscan

TFC

Timeless

Tocom

0040

0001

0310

0418

Remember, if you want to use your Cinema 5 to operate

your Cable Converter or Satellite Receiver, press the

CBL/SAT key first.

0012, 0013

Toshiba

Tusa

TV86

0000

0015

0063

0153, 0022, 0207

Your Cinema 5 is now programmed to operate your

DVD or Laser Disc Player. Write your DVD or Laser

Disc Player code in the boxes to the left for future ref-

erence.

Unika

United Artists

United Cable

Universal

Videoway

Viewstar

Zenith

0007

0003

0153, 0022, 0056, 0191, 0207

0250

0063, 0027, 0258

0525, 0000, 0015, 0207, 0008

0400

Remember, to use Cinema 5 to operate your DVD or Laser

Disc Player, press the DVD/LD key first.

Setup Codes for DVD Players

Zentek

JVC

0558

Setup Codes for Satellites

Kenwood

Magnavox

Mitsubishi

Onkyo

0534

0503

0521

0503

AlphaStar DBS 0772

Chaparral

Echostar DBS

ExpressVu DBS 0775

General

Instrument

Hitachi DBS

HTS DBS

Hughes Network

Systems DBS 0749

Jerrold Primestar 0627

0216

0775

Panasonic

Philips

Pioneer

Proscan

RCA

0490

0539, 0503

0525, 0571

0522

0361, 0627, 0869

0819

0775

0522

Samsung

Sony

0573

0533

Technics

Toshiba

Yamaha

Zenith

0490

0503

0490, 0545

0503

Jerrold

JVC

0361

0775

Magnavox DBS 0722, 0724

Memorex DBS 0724

Panasonic DBS 0701

Philips DBS

Primestar

Proscan

RCA DSS

Sony DBS

Star Choice DBS 0869

Setup Codes for Laser Disc Players

0722, 0724

0361, 0627

0566

0566, 0143, 0855

0639

Denon

Mitsubishi

NAD

0059

Pioneer

Sony

0059

0193, 0201

Programming the Cinema 5 to operate your Receiver/Tuner:

STS

0210

0790

0724, 0722

0856

Locate the brand name of your Receiver/Tuner in the “Setup

Codes For Receiver/Tuners” section (starting below), and

write it in below.

Toshiba DBS

Uniden DBS

Zenith

Receiver/Tuner Brand:________________________________

Programming the Cinema 5 to operate your DVD or

Laser Disc Player:

The brands are listed in alphabetical order with the most

popular codes listed first. You will use one of these codes to

program your Cinema 5 to operate your Receiver/Tuner as

follows:

Locate the brand name of your DVD or Laser Disc Player in

the DVD or Laser Disc Player setup codes (starting below),

and write it in the space below.

Turn on your Receiver/Tuner.

DVD/LD Player Brand:________________________________

Press RCVR and release. Press and hold SETUP

until the Cinema 5’s red light blinks twice, then

release SETUP.

The brands are listed in alphabetical order with the most pop-

ular codes listed first.You will use one of these codes to pro-

gram your Cinema 5 to operate your DVD or Laser Disc

Player as follows:

Enter the first four-digit Receiver/Tuner code listed

for your brand in the “Setup Codes For

Receivers/Tuners” section. If performed correctly,

the red light will blink twice when you enter the

final digit.

Turn on your DVD or Laser Disc Player and insert

a disc.

Press DVD/LD and release. Press and hold

SETUP until the Cinema 5’s red light blinks twice,

then release SETUP.

Aim the Cinema 5 at your Receiver/Tuner and press

POWER. The unit should turn off. If it does not

respond, repeat steps 2-4, trying each code listed

for your brand until you find one that works.

Enter the first four-digit DVD or Laser Disc Player

code listed for your brand. If performed correctly,

the red light will blink twice when entering the final

digit.

NOTE: If the unit still does not respond, try using

“SEARCHING FOR YOUR CODE”.

Aim the Cinema 5 at your DVD or LaserDisc

Player and press POWER.Your DVD or Laser Disc

Player should turn off. If it does not respond,

repeat steps 2-4, trying each code listed for your

brand until you find the one that works.

Your Cinema 5 is now programmed to operate

your Receiver/Tuner. Write your Receiver/Tuner

code in the boxes to the left for future reference.

NOTE: If you have tried all the codes listed for your

brand and your DVD or Laser Disc Player does not

respond, try using ‘SEARCHING FOR YOUR

CODE”.

Remember, to use your Cinema 5 to operate your

Receiver/Tuner, press the RCVR key first.

Slowly alternate between pressing POWER* and

TV until your TV turns OFF. Make sure that the

Cinema 5 is aimed at your TV during the search.

You may have to press this sequence of buttons

(POWER* then TV) up to 100 times to search the

entire library of codes.

Setup Codes For Receivers/Tuners

ADC

Akai

Aiwa

0531

0076

0121, 0158, 0189, 0405

Bang & Olufsen 0898

When your TV turns OFF, press and release

SETUP to lock in the code for your TV.Your

Cinema 5 is now programmed to operate your TV.

Capetronic

Carver

0531

0008, 0042, 0189, 0360

Casio

0195

Clarinette

Curtis Mathes

Denon

Fisher

Garrard

0195

0039, 0080

0004

0042, 0360

0463

*If you are searching for your VCR, CD, LD or DVD Player

code, you may want to play a tape or disk and use the STOP

key instead of the POWER key to search for your code.

When your VCR stops, press SETUP to lock in your code.

NOTE: To search for the codes of your other components,

repeat Steps 1 through 5, only substitute the appropriate

device key (ie., VCR, DVD/LD, RCVR, CD or CBL/SAT) for

the component you are searching for.

Harman/Kardon 0110, 0891, 0189

JBL

0110

JVC

0074

Kenwood

Linn

0027, 0313, 0314, 0186, 0042

0189

Lloyd’s

LXI

Magnavox

Marantz

MCS

Modulaire

NAD

Nakamichi

Onkyo

Optimus

0195

0181

RETRIEVING THE CODES PROGRAMMED INTO THE

Cinema 5

0189, 0195, 0531, 0391

0039, 0189

0039

0195

0320

0097

0135, 0380

0042, 0080, 0181, 0186, 0531, 0670,

0738, 0801

0039, 0309, 0518

0195

0189

0014*, 0080*, 0150, 0531, 0630, 1023

0039

0054, 0360, 0531, 0530

0181, 0195

0189

0322

0186

0491, 0502

If you have set up the Cinema 5 using the “SEARCHING

FOR YOUR CODE” procedure, you may want to figure out

which four-digit code is operating your equipment. Use this

procedure after you have set up your components to find out

which four-digit code is operating your equipment. For exam-

ple, to find out which code is operating your TV after setting

up your TV using the “SEARCHING FOR YOUR CODE”

procedure:

Panasonic

Penney

Philips

Pioneer

Quasar

RCA

Realistic

Sansui

Scott

Press TV and release. Press and hold SETUP until

the Cinema 5’s red light blinks twice, then release

SETUP.

Press 9 - 9 - 0.

For the first digit of your four-digit code, press 1

and count the number of times the red light (LED)

blinks on the Cinema 5. If the light does not blink

when you press the number 1, the digit is zero.

Sharp

Sherwood

Sony

0158**, 0474

Soundesign

TEAC

Technics

Victor

Wards

Yamaha

Yorx

0670

0463

0039, 0309, 0518

0074

0014, 0042, 0054, 0080, 0158, 0189

0176, 0186

0195

For the second digit, press 2 and count the num-

ber of times the red light (LED) blinks on the

Cinema 5. If the light does not blink when you

press the number 2, the digit is zero.

For the third digit, press 3 and count the number

of times the red light (LED) blinks on the Cinema

5. If the light does not blink when you press the

number 3, the digit is zero.

Zenith

0857

*May use Amplifier code 0013 for power and volume. See

page 21 for amplifier setup and codes.

For the fourth and final digit, press 4 and count the

number of times the red light (LED) blinks on the

Cinema 5. If the light does not blink when you

press the number 4, the digit is zero. Now you

have your four-digit code.

**May use Misc. Audio code 0159 to operate surround and

tuner presets. See page 24 for misc. audio setup and codes.

SEARCHING FOR YOUR CODE

NOTE: To find out the code for your other components,

repeat Steps 1 through 6, only substitute the appropriate

device key (VCR, DVD/LD, RCVR, CD or CBL/SAT) for the

component code you wish to learn.

If your TV, VCR or Cable Converter does not respond to the

Cinema 5 after trying all of the codes listed for your brand, or if

your brand is not listed at all, try searching for your code. For

example, after trying all of the codes for your TV, you still can-

not get the Cinema 5 to operate your TV, then:

LEARNING FUNCTIONS ONTO THE 1L, 2L, 3L AND 4L

KEYS

Turn on your TV.

Press TV and release. Press and hold SETUP until

the Cinema 5’s red light blinks twice, then release

SETUP.

The 1L, 2L, 3L and 4L keys can be used to customize those

functions that are unique to your home entertainment needs.

For example, the Cinema 5 does not offerTracking Up or

Down for a VCR. With the learning feature on the Cinema 5,

you can add these functions and many others learned from

your original remote control.

Press 9 - 9 - 1.

NOTE: Please have your original remote controls handy before

performing learning on the Cinema 5.

SETTING UP OTHER COMPONENTS

In addition to the components labeled on the device keys

(TV, VCR, DVD/LD, CBL/SAT, etc.), the Cinema 5 can also

operate the following components: Cassette Decks, Infrared

Home Automation, MiniDisc, Video Accessories and Miscel-

laneous Audio Components (Graphic Equalizers and Digital

Music Service Boxes).

Press and hold SETUP until the Cinema 5’s red

light blinks twice, then release SETUP.

Press 9 - 7 - 5. The Cinema 5’s red light will blink

twice.

Press and release the Device key in which you want

to learn a feature (e.g., TV).

The Setup Codes for these components can be accessed

under the following device keys:

NOTE: Steps 4 through 6 need to be completed within 10

seconds. Please read the next three steps before proceed-

ing.

Cassette Decks:

IR Home Automation:

MiniDisc:

Use the VCR Key

Use the CD Key

Press and release the L key in which the new fea-

ture is to be learned. The Cinema 5’s red light will

flash rapidly.

Video Accessories:

Use the CBL/SAT Key

(Note : WebTV found under Video Accessories)

Miscellaneous Audio: Use the AUX or RCVR Key

For example, to set up a Cassette Player on the VCR key:

Align your original remote control with the arrow

mark to the left of the LED on your Cinema 5

remote control (see diagram below)

Turn on your Cassette Player and insert a tape.

Press VCR and release. Press and hold SETUP

until the Cinema 5’s red light blinks twice, then

release SETUP.

Enter the first four-digit Cassette Player code listed

for your brand in the “Setup Codes For Audio

Cassettes” section. If you perform this procedure

correctly, the red light will blink twice when you

enter the final digit of your code.

NOTE: This diagram assumes that your original remote’s

LED is in the center. It may also be off center (to the right or

left side) If your Cinerma 7 will not take the command from

your original, try moving the originals alignment left or right

and see if the Cinema 5 accepts the signal from either posi-

tion.

Aim the Cinema 5 at your Cassette Player and

press PL (Play).Your unit should play the tape. If it

does not respond, repeat steps 2-4, trying each

code listed for your brand until you find the one

that works.

On your original remote, press and hold the key

(feature) you want to learn until the red light on the

Cinema 5 blinks twice. (If the red light does not

blink twice, stop and repeat steps 1 through 6.)

Your Cinema 5 is now programmed to operate

your Cassette Player.

NOTE: You can now repeat steps 3 through 6 to learn func-

tions on the other L keys.

Remember, if you want to use your Cinema 5 to operate

your Cassette Player, press the VCR key first.

Press and hold in the SETUP key until the Cinema

5’s red light flashes twice to lock in your new fea-

ture. (If the red light does not blink twice, stop and

repeat steps 1 through 6).

Setup Codes For Audio Cassettes

Aiwa

0029, 0197

Bang & Olufsen 0219

To test the new feature, press and release the

Device key in which the feature was learned fol-

lowed by the L key on which the feature was

learned.

Carver

Denon

0029

0076

Harman/Kardon 0182

JVC

0244

Magnavox

Marantz

Optimus

Philips

Pioneer

Sansui

Sony

Victor

Wards

Yamaha

0029

0027, 0220

0029

0027, 0220

0029

0170, 0243, 0291

0273

0027

Deleting Functions from the L Keys:

Press and hold in the SETUP key until the Cinema

5’s red light flashes twice and then release the

SETUP key.

Enter in 9 - 7 - 6.

Press and release the Device key (e.g., TV) where

0097

the learned feature to be deleted is stored.

Setup Codes For IR Home Automation

Press the L key to be deleted twice. The Cinema

5’s red light will blink twice after the second press

of the L key.

0240

Lutron

One For All

RadioShack

0318, 0597

0167

0240

Security System 0167

Universal X10

X10

0167

RCVR to VCR

SETUP* - 992 - VCR - RCVR - RCVR -

Setup Codes For MiniDisc

SETUP* - VCR code

Denon

JVC

Onkyo

Sharp

Sony

0873

0826, 0681

0868

0861

0490

RCVR to DVD/LD

RCVR to CBL/SAT

CBL/SAT to TV

SETUP* - 992 - DVD/LD - RCVR - RCVR -

SETUP*- DVD/LD Player code

SETUP* - 992 - CBL/SAT - RCVR -

RCVR - SETUP* - Cable/DBS code

SETUP* - 992 - TV - CBL/SAT -

CBL/SAT - SETUP* - TV code

Setup Codes For Video Accessories

Archer 0160

GC Electronics 0160

Jebsee 0160

Magnavox Web-TV 0818

Philips Web TV 0818

RadioShack

TeleCaption

Sony Web-TV

CBL/SAT to VCR

CBL/SAT to DVD/LD

CBL/SAT to RCVR

SETUP* - 992 - VCR - CBL/SAT -

CBL/SAT - SETUP* - VCR code

SETUP* - 992 - DVD/LD - CBL/SAT -

CBL/SAT - SETUP* - DVD or LD code

0160

0171

0850

SETUP* - 992 - RCVR - CBL/SAT -

CBL/SAT - SETUP* - Audio code

*NOTE: Here (*) you must hold SETUP until the Cinema 5’s

red light blinks twice.

Setup Codes For Miscellaneous Audio

Aiwa

0010, 0159, 0404

0052

Fisher

Harman/Kardon 0477

PROGRAMMING THE MACRO KEYS

Jerrold

JVC

Nikko

RCA

0459, 0520

0073

0376

0056

The Cinema 5 has two Macro keys (MACRO and MACRO2)

that allow the user to play back a series of keystrokes, at any

time, with the press of one key. For example, to set up a

sequence that will turn on your components and change the

components to the proper inputs:

Scientific Atlanta 0460

Sony

Starcom

0010, 0159

0459

Press and hold SETUP until the Cinema 5’s red

light blinks twice, then release SETUP.

RE-ASSIGNING DEVICE KEYS

Press 9 - 9 - 5. The Cinema 5’s red light will blink

twice.

Press and release one of the MACRO keys. This

will be the key that will play back the series of key-

strokes assigned to that key.

You can use the Cinema 5 to operate a second TV or a sec-

ond VCR or any combination of seven home entertainment

components. For example, you may want your Cinema 5 to

control 1 TV, 1 Cable Converter, 1 Receiver, 1 CD Player, 1

DVD Player and 2 VCRs. To accomplish this, you must re-

assign one of the device keys to operate the desired compo-

nent, in this case, a second VCR. The chart below shows

you how to re-assign a particular device key and then set up

your new component.

Begin entering the sequence of keystrokes, up to

15, that you wish to be played back when you

press the MACRO key. For example:

RCVR – POWER – TV – POWER – TV/VCR (To

change the input on the TV to VIDEO 1) –

CBL/SAT – POWER.

TV to VCRSETUP* - 992 - VCR - TV - TV - SETUP*

- VCR code

TV to DVD/LD

TV to RCVR

SETUP* - 992 - DVD/LD - TV - TV -

SETUP* - DVD or LD Player code

Once your sequence is entered, press and hold

SETUP until the Cinema 5’s red light blinks twice.

SETUP* - 992 - RCVR - TV - TV -

SETUP* - Audio code

Now, using the example as above, whenever the pro-

grammed MACRO key is pressed, the Receiver would power

ON, the TV will power ON and change the input to VIDEO 1

and then the Satellite would power ON.

TV to CBL/SAT

SETUP* - 992 - CBL/SAT - TV - TV -

SETUP* - Cable/DBS code

VCR to TVSETUP* - 992 - TV - VCR - VCR -

SETUP* - TV code

Repeat steps 1 - 5 to then setup a second sequence on the

MACRO2 key.

VCR to DVD/LD

VCR to RCVR

VCR to CBL/SAT

DVD/LD to TV

SETUP* - 992 - DVD/LD - VCR - VCR -

SETUP* - DVD/LD Player code

VOLUME LOCK

SETUP* - 992 - RCVR - VCR - VCR -

SETUP* - Audio code

Volume Lock allows the user to designate which component

will control the volume in the TV, DVD/LD and CBL/SAT

modes. To set the Volume Lock to the TV mode:

SETUP* - 992 - CBL/SAT - VCR - VCR -

SETUP* - Cable/DBS code

SETUP* - 992 - TV - DVD/LD - DVD/LD -

SETUP* - TV code

Press and hold SETUP until the Cinema 7’s red

light blinks twice, then release SETUP.

DVD/LD to VCR

SETUP* - 992 - VCR - DVD/LD - DVD/LD

Press 9 - 9 - 3. The Cinema 5’s red light will blink

twice.

- SETUP* - VCR code

DVD/LD to RCVR

DVD/LD to CBL/SAT

RCVR to TV

SETUP* - 992 - RCVR - DVD/LD -

DVD/LD - SETUP* - Audio code

Press and release TV. The Cinema 5’s red light

will blink twice.

SETUP* - 992 - CBL/SAT - DVD/LD -

DVD/LD - SETUP* - Cable/DBS code

ꢀ

Now, whenever you press VOL , VOL

VCR, DVD/LD and CBL/SAT modes your TV will control the

or MUTE in the

ꢀ

SETUP* - 992 - TV - RCVR - RCVR -

SETUP* - TV code

volume. If you would like to change the Volume Lock setting to

the VCR, DVD/LD or CBL/SAT modes repeat steps 1-3, only

substitute the appropriate device key. Setting the Volume Lock

to the TV, VCR, DVD/LD or CBL/SAT mode will not effect the

volume control in the RCVR mode.

To de-activate the built-in sleep timer,press

POWER.

NOTE: Plugging your TV into the outlet on the back of the

Cable Converter may allow you to turn both your Cable

Converter and TV ON and OFF

You can also change the Volume Lock setting so that an

Audio component controls the volume in all device modes.

TROUBLE SHOOTING

To change the Volume Lock setting on the Cinema 5 to the

RCVR mode:

Problem

Solution

Press and hold SETUP until the Cinema 5’s red

light blinks twice, then release SETUP.

Red light does not

blink when you

press a key?

Replace the batteries with four (4) new AAA

alkaline batteries.

Press 9 - 9 - 3. The Cinema 5’s red light will blink

twice.

The Cinema 5

Try all of the codes listed for your brand of

home entertainment component in the “Setup

Codes” section. Many setup codes may allow

for partial functionality, however, only one

setup code will operate your home entertain-

ment component correctly. Make sure that all

of the components you are setting up can

be operated with an infrared remote con-

trol.

does not operate

your home enter-

tainment compo-

nents or is not

performing com-

mands properly?

Press and release RCVR . The Cinema 5’s red

light will blink twice.

ꢀ

Now, whenever you press VOL ꢀ, VOL or MUTE your

Audio component will control the volume in all device modes.

You can also change the Volume Lock setting so that each

component controls its own volume. However, some compo-

nents do not have volume control. Using this setting may

eliminate volume control in some device modes. To change

the Volume Lock setting on the Cinema 5 so each mode

controls its own volume:

Problems pro-

gramming a

TV/VCR combo?

Try the VCR set-up codes for your brand.

However, some combo units may require both

a TV code for volume control and a VCR code

for the remaining functions.

VCR not record-

ing?

As a safety feature on the Cinema 5, you

must press the REC key twice.

Press and hold SETUP until the Cinema 5’s red

light blinks twice, then release SETUP.

Press 9 - 9 - 3. The Cinema 5’s red light will blink

twice.

and

Due to RCA design (1983-1987), only the

original remote control will operate these

functions.

PREV CH not

working for your

RCA TV?

ꢀ

Press and release VOL . The Cinema 5’s red

light will blink twice.

Problems chang-

ing channels?

If your original remote control required an

Enter keystroke when changing channels,

press the ENTER key on the Cinema 5 after

you enter the channel number.

ꢀ

Now, whenever you press press VOL ꢀ, VOL or MUTE on

the Cinema 5 each component will control its own volume,

provided each component has volume control.

The red light

Make sure you are aiming your Cinema 5 at

your home entertainment component and that

you are within 15 feet before using your

remote.

blinks when you

press a key but

you receive no

response from

your home enter-

tainment com-

ponent?

USING THE SLEEP KEY

The SLEEP key allows you to access the sleep timer of your

TV, Cable Converter/DBS Satellite or Audio component. You

can access your TV, Cable Converter, DBS Satellite or Audio

component’s Sleep Timer by pressing the SLEEP key. Most

Sleep Timers advance in increments of 10 or 15 minutes,

however, for specific instructions on setting your components

Sleep Timer, please consult your original owner’s manual.

Cinema 5 not

learning a com-

mand from your

original remote

control?

Make sure your remote controls are nose-to-

nose and are no more than 2 inches apart

(see diagram in step 5 on page 24).

Even if your original Cable Converter remote control did not

have a sleep timer, your Cinema 5 has its own built-in sleep

timer. If your Cable Converter does not have a sleep timer,

press the SLEEP key to activate the Cinema 5’s built-in

sleep timer. For example:

Tried “Search

Method” and still

did not find the

code?

Try the “Search Method” again after clearing

out the device key as follows: Press and hold

SETUP until red light blinks twice, then

release. Next enter 9 -9 - 2. Then press and

release the device key to be cleared twice.

Press and release the CBL/SAT key then press

the SLEEP key once to set the Cinema 5’s built-in

sleep timer for 15 minutes. The red light will blink

once.

Each additional press of the SLEEP key will add

15 more minutes to the Sleep Timer, up to a maxi-

mum of 60 minutes. The LED will blink twice when

the sleep timer is set for 30 minutes, 3 times for

45 minutes, or 4 times for 60 minutes.

Sony’s Picture In

Picture (PIP)

won’t turn off?

Press TV once. Press and hold SETUP until

red light blinks twice, then release. Enter 9 - 9 -

4 and press SETUP once. Then enter 6 -2 -1

and press PIP On/Off. The red light should

blink twice. PIP should operate properly now.

Sharp’s Picture In

Picture (PIP)

won’t work prop-

erly?

Sharp’s PIP feature requires separate PIP

functions for “on” and “off”.

NOTE: The sleep timer starts 10 seconds after

the last press of the SLEEP key. Once you have activated

the Cinema 5’s built-in sleep timer, you must keep the

remote control aimed directly at the component.

ONE FOR ALL PRODUCTS

For PIP “on”, press TV once. Press and hold

SETUP until red light blinks twice, then

release. Enter 9- 9-4 and press SETUP once.

Enter 3- 4-8 and press PIP On/Off. The red

light should blink twice. PIP “on” should oper-

ate properly now.

Limited Warranty

One For All (“OFA”) warrants, to the original purchaser only, that

this product will be free from defects in materials and workman-

ship, under normal use, for ninety (90) days from the date of

original purchase.

For PIP “off”, press TV once. Press and hold

SETUP until red light blinks twice, then

release. Enter 9- 9-4 and press SETUP once.

Enter 6-0-6 and press SETUP PIP On/Off.

The red light should blink twice. PIP “off”

should operate by pressing SETUP then the

PIP key.

This warranty does not cover damage or failures caused by

products or services not supplied by OFA, or which result from

accident, misuse, abuse, neglect, mishandling, misapplica-

tion, faulty installation, set-up adjustment, improper mainte-

nance, alteration, maladjustment of consumer controls, modi-

fications, commercial use, or that is attributable to acts of God.

There are no express warranties except as listed above. OFA

SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSE-

QUENTIAL DAMAGES RESULTING FROM THE USE OF

THIS PRODUCT OR ARISING OUT OF ANY BREACH OF

WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES,

INCLUDING THE WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMIT-

ED TO THE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion or limitation of inciden-

tal or consequential damages, or limitations on how long an

implied warranty lasts, so the above exclusions or limitations

may not apply to you. This warranty gives you specific legal

rights and you may also have other rights which vary from

state to state.

Surround on Sony

receiver will not

turn on?

Press RCVR once. Press and hold SETUP

until red light blinks twice, then release. Enter

9- 9-4 and press SETUP once. Enter 3- 9-8

and press SURROUND. Red light should blink

twice. Surround should operate now.

Sony receiver will

turn off but not

back on?

Try using the number pad on the Cinema 5 to

turn the receiver back on. For example, try

pressing 0 to turn on in the CD mode, or 4 to

turn on in the Video 1 mode. Other numeric

keys will also turn the receiver on. If this does-

n’t work, try the following:

Press RCVR once. Press and hold SETUP

until red light blinks twice, then release. Enter

9- 9 -4 and press SETUP once. Then enter 5

- 9 -1 and press POWER. The red light should

blink twice. Power should operate properly

now.

To obtain warranty service for a defective product during the

warranty period, please return the product, preferably in the

original carton, along with your purchase receipt, to the store of

original purchase. A note detailing the complaint would be help-

ful. The store, at its option, will replace or repair this product if

found to be defective.

Audio component

not fully-opera-

tional?

Audio functionality may be split between

codes. For example, Pioneer’s Tuner code

0014 works tuner presets, but only Amplifier

code 0013 works power and volume. This also

true for Sony’s Receiver code 0158 and Misc.

Audio code 0159.

One For All

(330)-405-8655

If some functionality is missing, try other

codes to see if functionality resides there.

www.oneforall.com

Mini-system, book-

shelf, or boombox

not working?

These systems may operate using a CD or

Misc. Audio code. If the original remote con-

trol did not have a power key, press PL (or

STOP) to turn on (or off) the system.

As you add new components to your home entertainment

system, One For All has a remote control that will fit your

needs. Look for these exciting products at a retailer near

you.

One For All and Cinema 5 are trademarks of Universal

Electronics Inc.

Consumer Help Line : 1-330-593-3335

E-Mail Address : [email protected]

World Wide Web : http://www.oneforall.com

ONE FOR ALL® is the registered trademark of Universal

Electronics Inc. Computime International Ltd. is the

Licensee of the ONE FOR ALL® brand for USA and

Canada.

One For All is designed for compatibility in North America

excluding Mexico.

URC-5800-Cinema 5

12/00

NETGEAR Switch GS510TP 100NAS User Manual
Netopia Network Router CLI 874 User Manual
Network Technologies Switch SM nXm C5AV LCD User Manual
Nokia Satellite TV System 1500S User Manual
NordicTrack Home Gym NTB09920 User Manual
NordicTrack Treadmill NTL10940 User Manual
Omron Healthcare Blood Pressure Monitor HEM 7211 E User Manual
Optoma Technology Projector EH500 User Manual
Panasonic Network Card 2SC4808G User Manual
Paradox Hellas SA Door DGP2 640 User Manual