This Product made by:
Newcon Optik
105 Sparks Ave
Toronto, Ontario,
M2H 2S5 Canada
Tel: 1 416 663 6963
Fax: 1 416 663 9065
E-mail: [email protected]
Export Information. Night Vision and Thermal Imaging Equipment in general is subject
to export control. Please consult your Local and Federal Government Authorities prior to
purchase or further shipment of the Controlled Goods. Newcon Optik relieves itself from
any liabilities, claims or accusations if its equipment is found in certain destinations without
proper Export Documentation. Newcon Optik under NO circumstance will illegally export
Basic User’s Manual
THERMAL IMAGING
BINOCULARS-
GOGGLES
TVS 7B
©2010 NEWCON OPTIK
6
3
Head Gear
Introduction
ROTATION ENABLING
BUTTON
BUTTON
Thermal Imaging Binoculars TVS 7B enable the profes-
sional users to visualize a heat irradiated by live bodies,
targets and other objects. Device detects extremely low
difference in temperature, thus distinguishing the object
image from its background.
Unlike the conventional night vision equipment, which
requires minimum light or supporting illumination and
might not always be effective in smoky or foggy environ-
ment, TVS 7B needs no light to operate and generates
high-quality image in the harsh weather conditions. The
camouflage doesn’t help to obscure a hiding body as TVS
7B detects body’s heat through.
Thermal imager is powerful tool for tactical, surveillance
and scene assessment applications. Its small size, light
weight and convenient bi-ocular design make TVS 7B
simple and effective in operation. Law enforcement, pub-
lic safety service and other professional users can use the
system to conduct hidden compartment searches, pe-
rimeter surveillance, marine or ground surveillance, safer
flights, structure profiling activities, fugitive and rescue
searches, disturbed surface investigations, pollutant
searches and vehicle pursuits. In fire and rescue applica-
tions, thermal imaging is used to conduct scene size up,
in-fire attack, search and rescue, hazmat assessments and
post-fire overhaul.
RING
MOUNTING
ADAPTER
SLEDGE
TVS 7B ATTACHED
TO HELMET MOUNT
TVS 7B is a self-contained system designed for use as
binoculars (hand-held operation) or goggles (head/Helmet
mounted). The Head Gear is furnished with “flip up”
mechanism.
To set and adjust the Head Gear turn the ring counter
clockwise until it stops. Press the button in the middle
of this ring and insert the mounting adapter sledge
into the mounting slot of the Device. Now you can re-
lease the button.
Set the Device in the most comfortable for Operator po-
sition, tighten the ring by turning it clockwise until it
stops.
Adjust and tighten all straps around the head and under
the chin to reach more convenient and stable state of the
device. To “flip-up” the Device simply press the rotation
enabling button and turn the device to the “top” posi-
tion. The mounting bracket can be
TVS 7B can be used as hand-held Thermal Imager Bin-
oculars or head/helmet-mounted Goggles.
removed from the Head Gear and
mounted to the helmet as well.
TVS 7B can be used with “snap
on” 50 mm lenses which increases
magnification and operating range.
Before attaching “snap on” lens re-
*Detection range depends on various factors, like outside
temperature, size of object, type of lens used etc.
**Universal Service Connector allows connecting
TVS 7B to video (cable enclosed) or to external battery
pack (optional)
move protective cover ring from
the existing lens of the TVS 7B.
4
5
Description
How To Do It
This is the short description how to operate TVS 7B.
Read carefully to make sure you fully understand how to
2
9
9
4
power up your Thermal Imager properly.
1
8
3
TVS 7B needs minimum 2.4 V and Maximum 3.3
V, therefore Use only Lithium type 2 pcs. AA batteries
(1.5V each) or at least 2500 mAh Rechargeable batteries
AA size (1.2V each).
To begin with, install batteries into battery compartment
(8) complying with polarity guidance (-)inside, (+)outside.
Remove cover from the front lens and switch Power But-
ton into position ON. Clicking sound in the beginning of
usage is normal for thermal core. By turning and moving
Dioptric Adjustment rings (9) adjust diopters and dis-
tance between eyepieces to satisfy the user eyes’ visual
acuity for the system’s best performance. Observing the
object adjust focus by turning front lens (6).
With optional Video-Out-to USB adapter and soft-
ware the video signal from Thermal Imager can be trans-
ferred to the computer and stored for tactical purposes.
Video-Out cable.
Allows to connect TVS 7B to any standard RCA Video-
In (monitor, TV, VCR etc.)
Video-Out-to USB adapter and software.
Allow to transfer images into digital format for further
transfer to a computerized fire control system.
NOTE. All technical description and features of the product are subject to
change without prior notice.
5
6
7
1. ON/OFF Power Button Switch
2. Left & Right Eyepieces with Rubber eyecups*
3. Manual Brightness Control (override) of displays.
4. Digital Zoom Button Switch
5. Universal Service Connector (see details on page 4)
6. Front lens with Focusing Ring
7. “Black hot-white hot” Button Switch (“BH-WH”)
8. Battery Compartment Cover
9. Dioptric Adjustment Rings.
*Interpupillary adjustments between eyes. Slide<-> or >-<
External Power Pack.
Very convenient for long time or cold weather operation.
Comes with high capacity Li-Ion batteries and universal
charger. Good for up to 8 hours of continuous work.
Caution! When external battery pack is in use strictly
recommended to remove 2 pcs. of AA batteries from
battery compartment. Leaving them inside will cause
overheating of the device and/or batteries which would
cause batteries leakage and power drain from the exter-
nal battery pack. Battery Pack has red LED which is ON
when connected to TVS 7B. Universal 110-250 V
charger is included.
TTENTION!
DO NOT POINT THE TURNED ON DEVICE
A
TO THE BRIGHT LIGHT SOURCE! IN SOME CASES LIGHT
OVERLOAD MAY CAUSE IRREVERSIBLE REDUCTION OF I.I.T. OR
F.P.A. RESPONSIVITY OR PERMANENT DAMAGING.
IMPORTANT NOTICE. USE OF IMPROPER
BATTERIES OR VOLTAGE MAY SERIOUSLY
DAMAGE DEVICE WITH NO WARRANTY
COVERAGE FROM US!
|